Default Router Password List for All Top Brands 2026

Here are the default Router Password and username to login to all top Routers brands.

In this tutorial, I have explained how to find out the default password for all major brands of Router. Techniques such as router labeling, default IP address information, and manufacturer manuals are incorporated in this tutorial.

This guide provides default username and password to access all top router brands including TP-Link, Netgear, D-Link, ASUS, Cisco, and more.

If you are looking for how to know the default router IP address to log in then you can visit the Router IP Address List.

=> Check Out The Perfect Computer Networking Guide Here

What is the Default Router Password?
The default usernames and passwords for most Routers are:
• Username – admin / Password – admin
• Username – admin / Password – password
• Password – admin / Password – blank

List of Default Router Password for all Routers (Updated 2026)

We have mentioned the details of some of the popular router in the table below.

Please note: Some of the popular manufacturers of routers, like HP, Compaq, Cisco, etc., have various models of routers, and they use different usernames and passwords for each of the models. However, it can be retrieved from the below mentioned method.

How to find Default Router Username and Password?

#1) The default username and password can be obtained from the router manual which comes with the router when you first purchase and install it.

#2) Generally, for most of the routers, the default username and password is “admin” and “admin”. However, these credentials may vary depending upon the maker of the router.

#3) If you have misplaced the manual, then one can discover the default credentials from the router hardware itself as they will be written on the side of every router.

#4) While using the router, we can change the credentials at any time to prevent
unauthorized access to the network. This can be done by resetting the router and entering a new password according to our choice.

#5) To reset the router, hold the reset button for few seconds and the router will get rebooted to its default factory settings. Later, we can change the default settings and set the username and password of our choice.

#6) Check the Router Sticker

For exact information regarding username and password, you should look at the device itself. Virtually all routers come with a label from the manufacturer, usually found on the bottom or the rear of the device.

Hardware Details of a Router

Click here for the website from which you can find the default credentials of any router by just mentioning the router name in the available dropdown menu.

Below is the snapshot of the same:

Use Router Manuals

In case you cannot locate any stickers, then you may check the user manual that comes with the device. All manufacturers specify the password to the router in the section “Initial Setup.”

ISP Apps

Should the router be supplied to you by the ISP itself, make sure you take advantage of their self-care application, which will likely display your network information on its dashboard (such as MyVerizon or the Xfinity app).

Find Credentials from Router Apps

With today’s advanced Smart or Mesh routers (such as Google Nest, Eero, or TP-Link Deco), access through browser interfaces has been abandoned for apps. When it comes to default credentials for such gadgets, it can be obtained using a secure Bluetooth handshake through the app.

What is the Difference between WiFi Password and Router Admin Password?

However, it is a widespread misconception that WiFi password and Router Admin password refer to one thing. But they have entirely distinct security functions when it comes to protecting your home network.

WiFi Network Password Explained

A wifi default password (sometimes called WiFi Security Key, WPA2 Key, or Passphrase) is a code used to access the internet on your phone, computer, or Smart TV.

• Main Function: To protect your wireless connection and make sure that none of your neighbors can use your internet traffic.
• Where It Can Be Found: On the back of the router, usually under the title “Wi-Fi Password” or “Network Key”.

Router Admin Login Explained

The router login password serves as the “master key” to gain access to the internal configuration of the router through the internet browser (at IP addresses such as 192.168.1.1).

• Main Objective: To rename your WiFi connection (SSID), upgrade the router software, configure parental control, or restore factory settings.
• Default Log-in Details: All router brands provide default log-in credentials such as admin/admin or admin/password.
• Major Security Warning: It doesn’t matter how complex your WiFi password is; having your router’s password as the default one exposes you to hackers who may remotely gain control of your whole network

What to do if the Default Router Password is not Working

It gets really annoying when you use the proper default username and password, but still get an “Invalid Credentials” message. This could be due to some changes made in the past or some technical problems. Here’s what you should do about it.

Restore Router Settings to Default Settings

In case the default password doesn’t work, the password for the router must have been changed in the past. To reset the default login details, follow these steps:

• Figure out where the tiny Reset button is located on the rear side of the router.
• Press the button using a pin or any other object for about 15 to 30 seconds with the router powered on.

Check for ISP-Customized Passwords

Your router could be an ISP-specific router with its password changed from the one given by the router manufacturer. You should see something other than the password set by the manufacturer on the sticker on the router. Remember also that there could be times when the Internet Service Provider requires that you access the router’s control panel using their website instead of the router’s IP address.

Browser Cache Issues

Sometimes the problem lies with your browser rather than the router. Try logging into your router in private or incognito mode in the case that there are any cached passwords stored within your browser or try out other browsers like Firefox and Edge.

Firmware & Compatibility Issues

Sometimes, the problem could be because of old router firmware or due to browser compatibility issues that could lead to not being able to access the login page even when using the correct details. You can upgrade your router firmware or contact the support of your router.

Important Reminder: A factory reset will wipe out all of your router settings; hence, your Wi-Fi name, password, and port forwarding will be reset.

Security Risks of Default Router Passwords

Not changing the router’s default passwords leaves your home network vulnerable in a similar way to locking the front door but leaving the key in the lock. Since the information on what this default passwords are is publicly available, this would be the hacker’s first step towards accessing your network.

How Hackers Exploit Default Credentials

Hackers have automated systems that include a list of default passwords for routers which can enable access to multiple networks at once.

Router Malware & Botnets

Unprotected routers are an easy target for malware like Mirai or Gafgyt. Hackers may take control of routers still using default passwords to build botnets for big-scale attacks and change the router’s DNS settings in order to redirect the users to sites imitating banking websites and social media platforms.

Why Changing Passwords Matters

Regular password change in your router becomes very important because it gives you protection against browsing tracking, ensures that nobody is able to connect to your camera or baby monitor or any other smart device, and also makes sure that no one misuses your WiFi or uses it for their malicious purposes.

How to Change the Default Router Password

Steps for Changing Your Router’s Default Password

• Login to the router with the default credentials.
• Go to the Advanced, Management or System Tools option.
• Look for Password, Admin or Admin Setup.
• Type in the existing default password in the Old Password field.
• Make a strong password, which should have at least 12 characters, consisting of capital letters, numbers and symbols.
• Hit Save or Apply and allow your router to restart. • Disable Remote Management or Web Access from WAN

FAQs about Default Router password

Conclusion

The router default user name and password provide easy access to the router configuration options. You may be required to know the default login information whether you use the router of TP-Link, Netgear, D-Link, ASUS, or the router provided by the Internet service provider. It is essential that when entering your login details, you enter the correct IP address of the admin along with the correct user name and password displayed on the router sticker or manual. Once you are logged in, you must ensure that you change your password to avoid any security issues.

Recommended reading => How to Update Router Firmware

Happy Reading!!

PREV Tutorial