Just a quick note to share software testing job opening posted on our jobs section.
We have updated our jobs section with latest QA and testing openings/walk-in details for freshers as well as experienced professions.
Those searching for software testing jobs can have a look on these openings:
- Software Testing openings for freshers in Neilsoft
- Freshers openings in Tieto
- Testing requirements with exposure on Health care Domain – IBM
- Testing Job requirements at Vertex
- Opening FOR GUI Tester in CMM5 company – Pune
- QA Manager requirement in Symantec
- Principle SQA Engineer opening in Symantec
- Sr. QA Engg (Automation) opening in Symantec
- QA Engineers Openings in Symantec
Please check our jobs section regularly to see more QA openings.
44 comments ↓
Great to see the section is updated. Thanks for the update Vijay. You’re inspiration for bloggers having testing blogs like me.
thanks for the info vijay
Hi,
How do you justify for your clients that, the test cases are written for a feature what you written are maximum and one can’t write more than what you have written?
Please answer me this is asked for me in an interview.
Please help me
Hi Sowmya(#3)
This is where Tracebility matrix comes to the picture. We have to get the approval/sig off of Test scenarios/Test cases from the client before to start execution. To make sure that we have cover maximum test cases…we have to provide the tracebility matrix. Here in T.Matrix we will map the requiremts with Use cases and use cases with scenarios and scenarios with Test cases(Both positive and negetive test cases). This mapping make sure us we are not missing any requirment to test and covering maximum test case , that too positive and negetive test cases
Regards
JagdishReddy
hi all,
can any one one tell me good institute for manual and automation testing in delhi/NCR.
thankyou
Hi All,
Currently i was involved in Manual Testing, Can any one of you suggest me ways to improve the testing skills in both and automation?
Hi guys, I have a 3yrs of exp in manual testing and not using any tool like QC. I want to switch in automation testing (QTP+QC) but the problem is all companies want exp. in automation which i don’t have.
Do you guys think by simply reading the basic fundamentals of QTP would help? Please suggest.
I m sorry I am new to this website so not sure if this is the right place to post this ques.
Thx.
Hi All,
Can anyone tell me
1. What is defect show stopper?
2. How to report a bug?(This answer should be practical and not just by saying that by making defect log we can report bugs)
Please do reply me as these questions were being asked in my interview
thank you
Dear SB (# 8),
Lets discuss y(our) questions.
1. Defect Show Stopper:
———————–
Whenever application is not working as per the requirement (as per the design), Means that, There is a mis match in the behavior of the application (DUT/SUT/AUT). This is a failure and the effect of the failure can be categorized in four ways.
a. Critical
b. High
c. Medium
d: Low
Critical:
——–
Application crashes.
Data loss will be there.
No work around. (Work around means, Alternate way
to over come from this problem, eg., Rebooting the
application etc.,)
QA team can’t go ahead with further testing process
until and unless if this works.
Means, That this is a SHOW STOPPER. This category of defects will be given high severity by the project manager to get this defect fixed immediately (with in a very short period of time). Test engineers will be highly appreciated for such category of issues/defects. Because QA team or Testing team is making the application to break here itself instead of allowing the application to break at the customers/field end.
High:
——
Application crashes.
Data loss.
Workaround will be there.
Means that, Testing team can go ahead for further process of testing approach because of the work around. Eg. Main check box selection. Expected behavior of this check box is, If we select/enable this main check box, All the check boxes present below this main check box should get selected.
But not getting selected/enabled and more over operation carried out is not getting succeed ( not getting effected on the below check boxes, Operation here may be reboot, delete, halt etc., whatever).
Workaround here: Selecting each check box manually and performing the operation.
Medium:
———
No application crash.
No data loss.
Workaround will be there.
Defect affect will be not major. Further process of
testing can be carried out.
Work Around here: In the above example only. Even though the below check boxes are not getting selected/enabled, But the operation carried out will be coming in to effect. Means that reboot/delete/halt whatever we do for the main check box after selection, Its getting affected to the below check boxes though they are not enabled/getting selected.
Low:
—–
No data loss.
No application crash.
Work around will be there.
Defect affect to the application is very minor. Say example as “spell mistake”, “color of the text”, “x,y co ordinates of the image”, “text on the button is not exactly in center of the button” etc.
——————————————————-
Coming to your second query:
Bug report:
A good bug report must consist of the below fields.
1. Project Name
2. Project Version
3. Submitter Name
4. Date reported
5. Synopsis (One line summary of the bug)
eg. All check boxes present under the main check box are not getting selected/enabled whenever user selects the main check box.
6. Description: Clean and concise explanation of the Synopsis.
7. Reproduction Steps:
8. Severity: Critical/Major/High/Low
9. Attachments: (screen shots if any!)
10. Notes: whatever you feel to provide to the developer.
eg. Tested in IE 5/6/7 and firefox 2/3
but the behavior remains same.
Even Attachment(s)/notes are not mandatory. But more the information provided better the bug report will be.
FYI that, So many more columns will be pre-defined in the reporting tools. But just mandatory columns – if we fill, Report will be get saved/success. Optional fields are ignorable. But its good to provide more information in detail. Its up to us.
———————————————–
_______________________
Just break the things in to small pieces. You’ll end up with many solutions (test cases).
Please note that, Whenever we failed to answer few questions during the interview, After completion of the interview, We have rights to ask the interviewer what are the answers for that. Its not a mistake at all. Yes, Believe me. We should not feel shy to ask. SIMPLE.
Good luck.
Regards,
Govardhan Reddy M,
Software Test Engineer.
“Failures are the pre-requisites for success, If you wan’t to succeed faster, Double the rate of your failure”
WANTED Software Engineers(Urgent Requirement)
A Fastest growing IT Company requires…
1. Software Engineers
Eligible criteria BE/ B.Tech /ME /M Tech /MCA /M.Sc (IT)
Eligibility: 2006-2009 Batch candidates only
Years of exp: 0
2. Software trainees
Eligible criteria BE/ B.Tech /ME /M Tech /MCA /M.Sc (IT)
Eligibility: 2010 Batch (Final year students) only
Interested candidates Send your CV to hrd@androit.net
Or call to +9198401 42402
ANDROIT SOLUTIONS
No.3 bharat flats,
rajarathinam 1st cross street,
ullagaram, chennai-600091.
Phone: +9144-43585604
very informative website for beginner…
i have got 1 year experience in manual testing . Is there any openings as a trainee for testing in Bangalore . Pls contact me in this mail
Dear Ms.Jyothi (# 12),
Pen down your email id. Better route your resume to me at gova.mca@gmail.com
Regards,
Govardhan Reddy M,
Software Test Engineer.
“Results matter, Efforts won’t”.
We are looking for fresh engineering graduates with the following eligibility to work out of our Bangalore facility:
Ø Engineers – B.E/B.Tech with 70% and above
Ø Graduation year of pass out – 2009
Ø XII Std – 75%
Ø X Std – 75%
If you have any of your acquaintances who satisfy the above criteria, you may please ask them to apply through the following link:
GO TO CALSOFTGROUP.C O M
GO TO CAREERS
GO TO APPLY FRESHERS
JUST APPLY
Shortlisted candidates will be called for a technical written test to be held in Bangalore, shortly.
Please note that:
Ø candidates not meeting any one of the above criteria will not be considered
Ø applications directly sent to the recruitment / HR team at Bangalore / Chennai will not be considered
Ø applications registered thro’ the above link will only be considered
Ø the above link will be open only till EOD of 15 Dec 09 and applications received beyond 15 Dec 09 will not be considered.
Hi all..
This is sharmila .. completed my B.Tech IT in 2009…. I’m a trained fresher in Software testing….
If there is any opening regarding my catogories just mail me….. sharmii88@yahoo.co.in
Hi
I have 19 months exp.
11 months in Software testing and 8 months in PHP & MySql
if you have any opening for software testing please let me know.
Thanks & Regards
Vishal Singh
Hi
I have 19 months exp.
11 months in Software testing and 8 months in PHP & MySql
if you have any opening for software testing please let me know.
Email ID vishal04061986@gmail.cm
Mobile No. 9594295540
Thanks & Regards
Vishal Singh
Hi All,
I have done my B.E (Electrical) and later worked with a bank for almost 6 years. I have also done software testing certification and have SDLC and UAT certifications through my employer. Now I wld like to pursue my career completely into testing. Pls let me know about the openings for software testing. I wld not mind even working as a fresher in the testing field.
Thanks and Regards,
Pooja
Dear Ms. Pooja (# 18),
Don’t wait for someone to update you with regard to the job requirements. Just upload your profile and keep updating in naukri and monsterindia.com, Calls will rock to either to your mobile or email.
Regards,
Govardhan Reddy M,
Software Test Engineer.
“Law of win says, Lets not do it in my way or your way, But lets do it in the best way”.
BE comp freher looking job in pune , mob no 9552812392
Dear Hello,
I have done my TYbsc(IT) and later worked with a ESSAR for almost 3 years. Pls let me know about the openings for software testing,Calls will rock to either to your mobile or email.
Email id:- sangaramu@gmail.com
Mobileno:- 8097729198
Is there any openings for freshers in us?
hi
im doing my s/w testing course..rite now i have completed manual testing & im a B.E Graduate(mechanical) passed in 2009..is there any opening?plz do let me know if there is any opening
Hi,
I have 1.4 years experience in manual testing. If there is any openings in testing please let me know
Hi Deepashri,
you can check the HCL site, i think they are hiring fresher.
Hello,
I have 2+ years experience in .Net .pls mail me if there are any req in .net aur testing , i can settle that also. my number is 09618105923
hi,
i’m navitha completed b.tech in 2008.i want to start my career in testing.how can i start and how to enter into this.wat r the basic things i need to do to enter into the software testing.
Hy software enginers
this is rajesh i was 2+ expreience if have any vacnices in chennai ple give the call
9043023825
Hi,
this is rajesh already i have this chat room i was 2+ Experience in software testing field right looking form good opportuintury so if u any vacnies in ur companies give me call
Hi,
I have around 4+ years of experience in Manula testing in Printer domain. I worked on Regression and integration testing for printer firmware both in laserjet and inkjet. Now i am looking for a openings in bangalore, Please refer.
Regards
manju
I am looking for a testing job in chennai. i have 1.4 years of experience in manual testing. so can you refer me to some companies for attending interviews.
Hi,
I am looking for a job in Software Testing in NCR location.
hi neelima,
kindly check esquire system chennai they are hiring a lot for their client.
I am an MCA of 2008 batch and having around 6 months of experience in software testing. Currently I am looking for a job change in software testing.
i have2.5 years experience in Testing and i am looking for change can anybody tell me if opening are there for 2.5 years..
this is mail-id ram2sunkari@gmail.com
my contact no. 09500019927
Hello sir,
I’m an ECE graduate 2009 passed out, 8 months experience in manual testing. now looking for job. please let me know the vacancy details to my mail id
My mail id : nmohanifet@gmail.com
hello friends this is manoj here and iam looking for the post of manual testing i have one year experience in dell as manual tester hence kindly help to get testing job alerts or email
regards
manoj
contact-9880759723
Hi friends,
When you are posting your details kindly mention your qualification, core knowledge, experience, location and contact details.
Such details are missing in most of the posting.
If you mention clearly then only the people in those area can help you.
hi vijay
this is jayanthi i attended one interview they asked me about sdlc .what is your idea of sdlc how to explain in intervie pls tell me in details .
bk..lk;p/
i have completed dip in computer engineering with the s/w testing .
I am an MCA of 2008 batch and having knowledge of software testing. Currently I am looking for a job in software testing.
I have completed diploma in software testing with manual and automation and I completed B.Sc. in maths with 72.00%. Today I am looking for job in software testing. If there is any opening please contact me as soon as possible.
Hi Friends
i continue my testing course in HYD
my course contain
manual testing
automation testing(QTP and loadruner )
these thing only…………
can it sufficient to get a job in this field having knowledge in this field as fresher……….
please reply my friend…………
Leave a Comment